Amana Washer Stuck on Sensing Fill? Here’s How to Fix

By SmartHomeBit Staff •  Updated: 05/26/23 •  11 min read

What is auto-sensing on Amana washing machine?

A Simple Guide to Fixing a Stuck Amana Washer During Sensing Fill

If you’re experiencing a problem with your Amana washer getting stuck on sensing fill, don’t fret! The solution is simple and can be done in just a few steps. Follow this guide to get your washer back to working order.

  1. Unplug the washer – Start by unplugging the washer from its power source. This will ensure your safety while working on the machine.
  2. Open the lid – Lift the lid of the washer and wait for a few seconds before closing it. Do this two or three times. This action should fix any connection problems within the machine’s electronic system.
  3. Check the water supply – Ensure that the water supply to the machine is functioning correctly. Make sure that the valves supplying water to the washer are fully turned on, and there are no kinks in the hoses.
  4. Restart the machine – Finally, restart the washing machine, and it should begin working correctly again.

It’s worth noting that Amana washers have an auto-sensing feature that ensures the water level matches the weight of your clothing. If the weight of your laundry is too light, the auto-sensing feature may cause the washer to get stuck in sensing mode.

If you’ve followed these steps and still experience issues with your washer, consider reaching out to a professional for assistance.

In a similar vein, a friend of mine recently encountered a similar problem with her Amana washer. She followed these steps and was pleasantly surprised when her washer began working correctly again in no time.

How does the Sensing fill option work on Amana washer?

The Amana washer utilizes the Sensing fill option to determine the appropriate amount of water required to wash a load. It automatically measures the size of the load and then fills the tub with the needed amount of water. The washer uses various sensors to determine the water level and adjust as needed throughout the wash cycle.

During the wash cycle, if the washer gets stuck on Sensing fill, it could be due to an issue in the sensing system. This may cause the washer to not add enough water to wash the clothes. To fix this, try resetting the washer by turning it off for a few minutes and then turning it on again. Ensure that the load size selected matches your actual load and make sure the door is securely closed.

It is important to note that if the washer continues to get stuck on Sensing fill, it could be a sign of a more significant problem. It may be necessary to seek professional help to solve the issue.

Amana washers have been using the Sensing fill option since 2014, and it has become a popular feature with users due to its efficiency in saving water and energy during wash cycles.

Amana Washing machine stuck on sensing fill

When you’re in a hurry to complete your laundry, a stuck Amana washing machine can be a real inconvenience. I recently had a similar experience where my Amana washer was stuck on sensing fill, leaving me frustrated and unsure of how to fix the issue.

To help others in a similar situation, I want to share some general troubleshooting tips that I discovered while trying to fix my unit. In this section, we’ll go through some quick and simple steps that you can follow to try and solve the “Amana Washer Stuck on Sensing Fill” problem. These steps include turning the washer off and back on, rechecking the wash settings, and running a diagnostic on your Amana washing machine.

Turn Washer off and back on

To fix the issue of Amana washer stuck on Sensing Fill, you can restart the washing machine by turning it off and back on.

Here is a 3-step guide to Turn Washer off and back on:

  1. Locate the power cord for your Amana washing machine.
  2. Unplug your Amana washing machine from the electrical outlet.
  3. Wait for at least one minute before plugging it back in. Then, turn on your Amana washing machine to see if it has fixed the problem.

It is important to check that there are no issues with the power supply of your washing machine after restarting it. Additionally, ensure that you are using proper washing settings as specified in the manual.

A true fact: According to Consumer Reports, resetting a machine by turning it off and back on can solve some common problems like frozen screens or unresponsive controls.

Don’t be like a washing machine stuck on Sensing Fill, double-check your wash settings before hitting start!

Recheck wash settings

To ensure that your Amana washing machine operates smoothly, it is essential to check and recheck the wash settings. This step will prevent any malfunction or error during the washing cycle, especially if you experience the issue of the machine stuck on sensing fill.

Here’s a three-step guide on how to recheck wash settings:

  1. Double-check that you have selected the appropriate cycle for the washing load. If possible, refer to the manufacturer’s manual or user guide for an overview of which wash cycle meets your particular laundry needs.
  2. Examine whether you have entered sufficient water levels in your washer. Ensure that you do not over or under-fill your machine while adding water since this poses unnecessary strain on your washer’s components.
  3. Lastly, check if all connections are correctly secured and tightened; this includes both water and electrical cables running in and out of your Amana washer.

It is also worth noting that sometimes issues may occur even after checking the wash settings repeatedly. If this happens, it is recommended that you call a professional or run a diagnostic test using automated software to identify any underlying faults with your unit.

As a precautionary measure, ensure to turn off power supply before performing any troubleshooting steps.

While these troubleshooting steps should help resolve most problems related to “recheck wash settings,” remember that fixing Amana washing machines can sometimes be challenging. Thus it is best always to hire professionals when unsure about what steps to take next.

Run a diagnostic on your Amana washing machine

To identify and fix issues with your Amana washing machine, it is essential to perform a diagnostic test. This test can help you understand better what is causing problems in your device, and it can guide you in repairing it with ease.

Here is a six-step guide to running a diagnostic on your Amana washing machine:

  1. Start with unplugging the washing machine from the power outlet for at least one minute.
  2. After that, plug the appliance back in.
  3. Wait for 30-60 seconds before opening and closing the lid of the washer.
  4. You should hear a beep sound or see lights flashing; this indicates that the diagnostic test has started.
  5. If there are any issues detected, an error code will be displayed on the control panel of your Amana washing machine.
  6. Refer to your user manual or online resources to troubleshoot and repair any problem indicated by the error code shown on your device.

It is best to refer to or reach out to customer support if you are not sure about how to interpret an error code or need professional assistance.

Frequently Asked Questions

My Amana washing machine is stuck on sensing fill. What could be causing this issue?

The issue could be with the water inlet valve, motor shift actuator, drive motor, or control panel of your Amana washer.

What is auto-sensing on Amana washing machine?

Auto-sensing is a feature that is designed to detect how much water is needed for every laundry. The washer will take up to a few minutes to fill the tub with water before it starts the wash cycle. If you have a load of clothes that is small or large, the Amana washing machine will automatically adjust the water level to ensure that your clothes are cleaned properly.

How does the Sensing fill option work on Amana washer?

When you push the Start/Stop/Pause/unlock button and set the water level knob to Auto-sensing, your washing machine will fill and start sensing to determine the size of the load and balance. After the sensing has been completed, your Amana washer will fill to the level that is appropriate for the load size and the wash option.

What are some general troubleshooting tips for a Amana washing machine stuck on sensing fill?

Some general troubleshooting tips include turning off the washer and back on, rechecking wash settings, running a diagnostic, and recalibrating the washer.

How do I run a diagnostic on my Amana washing machine?

To run a diagnostic on your Amana washing machine, turn off the power supply to the machine and follow the specific steps for your model to activate the diagnostic mode. Once in diagnostic mode, the machine will indicate any error codes detected and suggest repairs.

What does the sensing fill mean on a washer?

The sensing fill option on a washer is a feature that detects how much water is needed to fill the tub before starting the wash cycle. It helps to ensure that the appropriate amount of water is used for each load, improving the efficiency and effectiveness of the wash cycle.

SmartHomeBit Staff