Table of Contents
Understanding the Electrolux Dryer Start Button Flashing Issue
Have you ever come across an Electrolux dryer with the start button flashing? It can be a frustrating issue for many homeowners. In this section, we will be discussing the symptoms of the Electrolux dryer start button flashing issue to help you identify what could be causing this problem. With the help of this guide, you can take the necessary steps to address the problem and get your dryer up and running again in no time.
Symptoms of the Flashing Start Button
The Electrolux Dryer Start Button Flashing Issue can be confusing. The start button will blink to indicate something’s wrong. To identify the problem, know the codes associated with each error.
- If the start button blinks twice per second, the door may not shut properly or stayed open too long.
- If it flashes three times per second, there may be an obstruction in the door.
- A four-time flash could mean a malfunction with the latch or wiring.
- A five-time flash may point to an issue with the start switch or timer.
Other possible causes include blocked inlet filters, clogged outlet hoses, incorrect tumble settings, or insufficiently loaded drums. If DIY repairs don’t work, call a professional to replace the part.
Keep an eye out for Electrolux Dryer Start Button Flashing Issue symptoms. Understand the flashing codes and take action when necessary. If your dryer’s start button is blinking, don’t hesitate to take care of the problem.
Reasons for the Flashing Start Button
A flashing start button on an Electrolux dryer can have several causes. One of the most common is a malfunctioning control board. Also, a faulty door switch, power supply interruptions, motor overheating, overload or sensor failures can lead to this issue. It can also be a symptom of a bigger problem like a broken belt or drum.
To identify the exact cause, refer to the dryer’s manual or contact customer service. They will offer instructions to inspect various components or reset the settings.
Attempting repairs or disassembly without expertise and the right equipment is dangerous and may void the warranty. It’s best to use a certified technician or authorized repair service.
According to RepairClinic.com, a faulty user interface board may also be the cause and need replacement.
Resolving the Electrolux Dryer Start Button Flashing Issue
Don’t panic if your Electrolux dryer’s start button keeps flashing. Follow these troubleshooting steps to fix it:
- Unplug the dryer and wait 60 seconds before plugging it in again.
- Check that the door is closed and latched properly.
- Also, make sure the laundry load isn’t too big or small.
- It’s important to verify that the lint filter and exhaust vent are clear.
- If these steps don’t help, try resetting the control board by unplugging and plugging back in after 5 minutes.
- If the issue continues, get an authorized Electrolux technician to check and repair the dryer.
It’s essential to use the right steps to fix the start button flashing. Don’t use extension cords with the dryer as it may cause electric hazards and damage.
In the end, if the start button of your Electrolux dryer is flashing, it could mean a problem in the control board. This could be caused by a loose connection or a bad moisture sensor.
Open the dryer’s cabinet to take a look at the control board and the moisture sensor. However, be careful when dealing with the electricity. Better to get professional help.
Regular cleaning and maintenance can help prevent these issues. A source from Electrolux suggests this!
FAQs about Electrolux Dryer Start Button Flashing
Why is my Electrolux dryer’s start button flashing?
The flashing start button is a safety feature to prevent the dryer from starting with an open dryer door. The most common reason for the flashing start button is an improperly shut door. Check for any obstruction or damage to the dryer door switch. If there is no obstruction, a broken or malfunctioning switch needs replacement by a professional repairman.
What should I do if my Electrolux dryer won’t start?
If your Electrolux Tumble Dryer is not starting, try the following:
- Check if the delayed start option is enabled or if there is a countdown.
- Check if the child lock is activated.
- Ensure door is shut properly and check for damage.
- Check if the tumble dryer is in energy-saving mode and disable it.
Why does my Electrolux dryer start button keep flashing?
If your Electrolux dryer start button keeps flashing after all LEDs go off, it may indicate that the tumble dryer is not starting. Check for delayed start options or countdown, child lock activation, and ensure the door is shut properly. Also, check for defects in the product display and the start/pause LED.
How can I enter my location to find a tradesperson or supplier?
To enter your location and find a tradesperson or supplier, go to a website that offers a local search for finding tradespeople or suppliers. Select the type of service you need and enter your location to begin the search. Available services include plumber/gas engineer, electrician, builder, decorator, builders’ merchant, tile supplier, and flooring supplier.
What should I check if my Electrolux dryer stops and flashes a few minutes into the drying cycle?
If your Electrolux dryer stops and flashes a few minutes into the drying cycle, check the following:
- Clean filters and empty water container.
- Check outlet hose for kinks.
- Ensure the drum is filled sufficiently to detect clothing dryness.
How can I find a tradesperson to get the job done?
To find a tradesperson to get the job done, you can use a local search website that offers the option to find tradespeople or suppliers. Select the type of service you need and enter your location to begin the search. Tradespeople and suppliers can also create a free listing on the website.