Here’s How to Reset Your Logi Keyboard

By SmartHomeBit Staff •  Updated: 06/25/23 •  12 min read

Resetting Logitech keyboards is essential. It helps keep performance up and any problems away. A reset restores the keyboard to its original settings, solving any software or connection difficulties. This is super important, especially for people who rely on their Logitech keyboards for work.

To reset your Logitech keyboard:

  1. Unplug it from your device.
  2. Turn it off, if it has a power switch.
  3. Take out the batteries, if it’s wireless.
  4. Wait 10 seconds for the keyboard to power down.
  5. Put the batteries back in, and turn it on.
  6. Reconnect the keyboard to your device.

By doing this, you’ll reset your Logitech keyboard and fix any issues you had. Also, keep your computer’s drivers up to date, and make sure there are no physical obstacles blocking the connection.

It’s worth taking a few minutes to reset your Logitech keyboard. It’ll save you time and frustration, by making sure it works without disruption. So, prioritize the reset!

Common Causes of Logitech Keyboard Issues

Logitech keyboards can experience common problems. These can be caused by a variety of reasons. To troubleshoot them efficiently, it’s important to understand these causes. Here are some typical ones:

  1. Connectivity Issues: A possible issue is when the keyboard isn’t properly connected to the computer. Or, there could be signal interferences. Check the connection and make sure nothing is blocking the signal.
  2. Software or Driver Issues: Logitech keyboards need software and drivers to work. If these are outdated or corrupted, it can cause trouble. You may need to update or reinstall them.
  3. Battery or Power Problems: Wireless keyboards require power. Low battery or incorrect insertion can lead to malfunctions. Check the battery level and make sure it’s inserted properly.
  4. Hardware Damages: Drops or spills can damage the keyboard’s internal components, which can affect performance. Inspect the keyboard and get professional help if needed.
  5. User Error: Sometimes, user error is the cause. Accidental key combinations or wrong settings can cause unexpected behavior. Resetting the keyboard to default or consulting the user manual can help.
  6. Compatibility Issues: Incompatibility with the operating system or other software also causes problems. Ensure the keyboard meets requirements and update the necessary software.

Pro Tip: When experiencing Logitech keyboard issues, try restarting the computer first. This can often solve temporary software or connectivity glitches.

Troubleshooting Steps for Logitech Keyboard Reset

Looking to troubleshoot your Logitech keyboard? This section has got you covered with step-by-step instructions on resetting your keyboard based on its type. From wireless to Bluetooth and unifying keyboards, as well as the popular Logitech MX Keys, we’ll guide you through the necessary reset procedures. Let’s get your Logitech keyboard back in working order in no time.

Resetting Logitech Wireless Keyboards

  1. Reset your Logitech wireless keyboard to get optimal performance!
  2. To do this, switch the power off and remove the batteries.
  3. Then, press and hold the “Connect” button for five seconds and reinsert the batteries.
  4. Release the button and wait for the connection to be established.
  5. Test the keyboard to ensure all keys are working properly.

Depending on the model of keyboard, the steps may vary. If needed, check the product manual or Logitech’s website for specific instructions.

Resetting a Logitech wireless keyboard can help resolve connectivity issues, unresponsive keys, or erratic behavior. It’s a great way to restore functionality and troubleshoot any performance issues. So, go ahead and give it a try!

Resetting Logitech Bluetooth Keyboards

Steps to reset your Logitech Bluetooth keyboards:

  1. Press the power button to turn off the keyboard.
  2. Press and hold the “Bluetooth” button until the LED indicator blinks rapidly.
  3. Go to your device’s Bluetooth settings and remove the keyboard from the list of paired devices.
  4. Restart your device to clear any existing Bluetooth connections.
  5. Turn on the keyboard and press and hold the “Bluetooth” button until the LED blinks slowly to put it in pairing mode.
  6. On your device, go to the Bluetooth settings and select the Logitech keyboard from the list of available devices to pair it.

These steps will help you reset your Logitech Bluetooth keyboards and resolve any connectivity issues.

Make sure your device’s Bluetooth is turned on and functioning properly. Also, replace or recharge the batteries in your keyboard if necessary.

Resetting Logitech Unifying Keyboards

  1. Connect the keyboard’s receiver to your computer. Locate the USB receiver that was included with your keyboard and plug it into a USB port.
  2. Turn on the keyboard. Look for the power switch, which is usually on the underside or side of the keyboard, and press it.
  3. Press and hold the reset button. Find the reset button on the Logitech Unifying receiver. It is usually a small pinhole that can be pressed using a paperclip or similar tool. Hold it for 5 seconds.
  4. Pair the keyboard with the receiver. Release the reset button. Then press and hold any key on your Logitech keyboard for a few seconds. Both the receiver and keyboard’s LED indicator lights will start flashing rapidly – this signals that they are now paired.

If you have multiple Logitech devices connected through a single Unifying receiver, resetting one device will automatically unpair all other devices from the receiver. You will need to pair each device again.

Refer to your specific Logitech device’s instructions for accurate information regarding resetting procedures, as they may vary based on the device model.

Now you know how to reset your Logitech Unifying keyboard and ensure optimal performance!

Resetting Logitech MX Keys

Logitech MX Keys is a high-performance keyboard created by Logitech. Resetting the Logitech MX Keys can help solve any issues or problems you may have with the keyboard’s performance. By following a few steps, you can reset your Logitech MX Keys and restore it to its default settings.

  1. Switch off the Logitech MX Keys. To do this, press and hold the power button situated at the back of the keyboard.
  2. Find the reset pinhole at the bottom of the keyboard. Use something thin like a paperclip or pin to press and hold the reset button in the pinhole for around 5 seconds.
  3. Release the reset button, then turn on the Logitech MX Keys again with the power button.

Do these three steps, and you can successfully reset your Logitech MX Keys. This process will help restore your keyboard to its original settings and make sure that it works correctly.

Remember though that resetting your Logitech MX Keys should only be done when needed as it will delete any customization or personalization settings you’ve made on the keyboard. Make sure to save any important settings before you reset.

Don’t miss out on resolving any troubles with your Logitech MX Keys. Follow these steps to reset your keyboard and get back its full functionality.

Additional Troubleshooting Options

Resetting a Logi keyboard requires following certain troubleshooting options. Firstly, make sure the keyboard is connected to the computer and the batteries are in. If the keyboard still isn’t working, try restarting the computer. Additionally, check for software updates or reinstall the keyboard’s drivers to address compatibility issues. If everything fails, contact Logi customer support for help.

Another step to take is looking out for a specific button combination to reset the Logi keyboard. This depends on the model, so refer to the keyboard manual or Logi website for instructions. Additionally, connecting the keyboard to another computer can determine if the issue is with the keyboard itself or the computer.

It’s worth noting that Logitech, parent company of Logi, is a renowned brand globally. They produce a wide range of computer peripherals, and their keyboards are known for quality and durability, thus preferred by users worldwide.


It’s easy to reset a Logi keyboard. Simply follow the steps detailed in the article, “How to Reset Logi Keyboard.” This guide equips users with the necessary knowledge for a successful reset. Plus, it offers extra info that helps to understand the process.

To restore the keyboard’s optimal functioning state, just follow the instructions. Then, any issues with the keyboard can be addressed without hassle.

FAQs about How To Reset Logi Keyboard

How do I factory reset my Logitech keyboard?

To factory reset your Logitech keyboard, you can follow these steps:

  1. Turn off the keyboard.
  2. Press and hold the ESC key.
  3. Turn the keyboard on while still holding the ESC key.
  4. Release the ESC key after five seconds.
  5. The keyboard should flash, indicating a successful reset.

How can I navigate the reset process on a Logitech keyboard?

Navigating the reset process on a Logitech keyboard depends on the type of keyboard you have. Here are a few methods:

How do I reset a Logitech keyboard if it stops working?

If your Logitech keyboard stops working, you may need to reset it. Here’s how:

  1. Turn off the keyboard.
  2. Disconnect it from your computer.
  3. Remove the batteries (if applicable).
  4. Press and hold the connect button on the keyboard for at least 5 seconds.
  5. Plug the receiver back into your computer and wait for it to be detected.
  6. Turn the keyboard back on.

How can I pair a Logitech keyboard with Bluetooth devices?

To pair a Logitech keyboard with Bluetooth devices, follow these steps:

What should I do if the receiver of my Logitech wireless keyboard is not working?

If the receiver of your Logitech wireless keyboard is not working, here are some steps you can try:

How do I update the drivers for my Logitech keyboard?

To update the drivers for your Logitech keyboard, you can follow these steps:

  1. Go to the “Device Manager” in the “Control Panel.”
  2. Double-click the keyboard device.
  3. Click “Update Driver” to update the driver.
  4. If no driver is found, visit Logitech Support to download and install the driver specific to the wireless keyboard.
  5. Reboot the computer after installing the driver to reset the wireless keyboard.

SmartHomeBit Staff