Maytag Washer Not Draining? Here’s What to Do

By SmartHomeBit Staff •  Updated: 05/26/23 •  12 min read

A Maytag washer that won’t drain can cause odors and mold. Possible causes? Faulty pumps, blocked hoses, clogged filters, or a defective lid switch. Here’s an easy 4-step guide to help!

  1. Check the drain hose. Ensure it isn’t twisted or kinked.
  2. Inspect the pump. Remove any debris.
  3. If 1 and 2 don’t work, check the filter. Clean out any dirt or debris.
  4. If none of these work, consider replacing the lid switch.

Also, improper installation and overloading can lead to drainage issues. Install the appliance correctly and don’t overload it.

  1. Start by unplugging your washer and checking the drain hose for any clogs or kinks.
  2. If the drain hose is clear, move onto the pump by removing the front panel and checking for clogs or damage. Replace as necessary.
  3. Check the lid switch to ensure it is functioning properly and not obstructed. Replace if damaged or malfunctioning.
  4. Inspect the pump belt for any damage or looseness and replace if necessary.
  5. Check the drain pump filter for any obstructions and clear them as necessary.
  6. If none of the above steps fix the issue, you may need to call a professional for assistance.

It’s important to note that proper maintenance and care of your washer can prevent future draining issues. Avoid overloading the washer, use the appropriate detergent, and regularly clean the washer’s interior and components.

By taking these troubleshooting steps, you can save time and potentially money by fixing the issue yourself. Don’t let the fear of a broken washer disrupt your daily routine and take action today.

Inspect the drain hose and pump for clogs

Are you dealing with a blocked Maytag washer? Here’s a 6-step guide to help sort it out:

  1. Unplug from the power source.
  2. Locate the drain hose at the back.
  3. Check the hose for debris.
  4. Clean with warm water and soap.
  5. Examine the pump with needle-nose pliers or tweezers.
  6. Securely reconnect the hose.

Keep an eye out for models with removable filters. Your user manual will let you know.

Free-flowing drainage is key to optimal efficiency, preventing water damage, and a long-lasting machine. Take action now and nip this small issue in the bud!

Check the washer’s lid switch

For your Maytag washer to function properly, you must check the status of the lid switch. This is especially important when it comes to drainage issues. Here are 3 easy steps to follow:

  1. Unplug the machine and check the area around the lid switch.
  2. Put a screwdriver into the slot beneath the lid.
  3. Gently press on the top to open it. Hold both sides of the washer’s opening.

Now you can use the Maytag washer without worrying about drainage problems.

It’s vital to remember that if you don’t check the lid switch, your daily routine might be ruined. Taking good care of your washing machine is key to its performance and long-lastingness. Keep an eye out for any issues and fix them before they get worse.

Don’t forget to check the washer’s lid switch! Time to check the drain pump – not as exciting as it sounds!

Look for any obstructions in the drain pump/filter

Unplug the washer and turn off hot and cold water supply valves. Move it away from wall to access the back panel.

Locate the drain pump/filter at bottom right corner and turn it counterclockwise to remove. Check for any clogs or debris that may be blocking water flow from the machine.

Also, make sure other issues that can cause drainage problems are ruled out. Such as, kinked hoses, damaged belts, faulty lid switches, and malfunctioning pumps.

A user reported Maytag washer not draining when they moved to another state for work. They searched online but couldn’t find a solution. After calling tech support, they found out a packing peanut had made its way into the filter during transit and was blocking water flow. So, they removed it and everything worked fine again.

Time to investigate! Inspect the belt and motor for any abnormal activity.

Inspect the washer’s belt and motor for any issues

Are you experiencing issues with your Maytag washer not draining? To diagnose the issue, inspect the belt and motor. Follow this 4-Step Guide:

  1. Unplug the appliance.
  2. Remove the back panel.
  3. Check the belt tension. Replace if required.
  4. Examine the motor functionality. Call a technician if needed.

Also, pump impellers can become clogged, resulting in water backup.

Consumer Reports suggest that Maytag washers are better than other brands. Remember to unplug the appliance before inspecting the control board!

Check the washer’s control board

To find out why a Maytag washer isn’t draining, inspect the control board. It’s important for the machine’s functioning. Here’s how to check it:

  1. Unplug the washer from all sources of power.
  2. Follow the manufacturer’s directions to remove the control panel.
  3. Look closely at the control board’s wires and connections for damage or signs of wear and tear. Make sure to tighten any loose or disconnected cables.
  4. If the issue continues, ask a certified technician for help.

Be cautious when inspecting and handling parts with high electric voltage.

A useful tip: Clean the washer’s filter every 6 months to prevent drainage problems. Remove any obstructions that could block it. It’s better to keep the washer up-to-date than to deal with a clogged drain – save yourself the hassle!

Tips on maintaining and preventing Maytag washer not draining issue

Proper maintenance and regular checkups are essential in preventing your Maytag washer from experiencing draining issues. Here are some helpful tips to keep your washer running smoothly.

  1. Inspect the drain hose to ensure it’s not blocked or kinked.
  2. Check the washer’s lid switch to ensure it’s functioning properly.
  3. If the washer has a lint filter, clean it regularly.
  4. Regularly clean the washer’s tub to prevent buildup or clogs.
  5. Use the appropriate amount of detergent to prevent excess suds from forming.
  6. If all else fails, check and replace the washer’s water pump.

In addition to these preventative measures, it’s crucial to address draining issues as soon as possible to prevent damage to the washer’s internal components. Ignoring the problem can result in costly repairs and potentially render the washer unusable.

According to Consumer Reports, Maytag washing machines are known for their durability and reliability, but regular maintenance is still necessary to keep them running smoothly.
Skip the plumber and channel your inner detective with this tip to prevent clogs: clean the drain pump and filter regularly.

Regularly clean the drain pump and filter

It’s essential to keep the drain pump and filter of your Maytag washer clean to avoid any draining issues. Follow these five steps:

  1. Switch off and unplug from the power socket.
  2. Locate and open the lower panel to access the drain pump.
  3. Carefully unscrew the cap to prevent water spilling out.
  4. Use a soft-bristle brush and hot water under low pressure to clean the debris and dirt on the filter.
  5. Reassemble components in reverse order after cleaning.

Remember to do regular maintenance! Ignoring this will lead to expensive repairs and slower processing times. Keep your washer operating smoothly with regular cleaning habits. Don’t let it become a clothes graveyard!

Do not overload the washer with clothes

It’s not a good idea to overload your Maytag washer with clothes. Here’re some things you can do to prevent it:

  1. Divide your laundry into small loads.
  2. Don’t pack the clothes too tightly in the washer drum.
  3. Follow the load capacity guidelines in the manual.
  4. Get a larger capacity washer if needed.

Putting all your dirty clothes in one go may look quicker. But this can lead to regular breakdowns and repairs. Following these steps will make sure your machine works fine.

Using too much detergent can cause clogged drains. Stick to the recommended amount from the manufacturer to avoid that.

Studies have shown that overloading is not just bad for your washing machine, but also your hydro bill and safety! (Source: Consumer Reports) So don’t be a rebel and use the right amount and type of detergent, or else your Maytag washer might rebel against you!

Use the right amount and type of detergent

For your Maytag washer to operate properly and so you don’t experience it not draining, using the correct detergent in the right amount is extremely important. Here’s a five-step guide to help with detergent usage:

  1. Study the detergent instructions.
  2. Opt for a great quality liquid or powder detergent suitable for your washing machine.
  3. Don’t use too much detergent; just use the suggested amount based on your wash load size.
  4. If too many suds come up during the wash, use less detergent next time.
  5. Be sparing with fabric softener to stop buildup in your machine’s dispenser and pipes.

Remember, some detergents may not be compatible with your washer’s features, which can lead to clogging and malfunctioning. To make sure this doesn’t happen, stick to this guide and avoid common mistakes. Don’t let the wrong detergent use hold you back from a fully functional machine.

By following these steps you can save yourself a lot of trouble and get back to having a carefree laundry day! Keep your washer steady and don’t let it start a spin cycle mosh pit!

Keep the washer level and stable

Stability and level of the washer are important for optimal functioning and to prevent Maytag washer not draining issue. This ensures vibration is prevented and the load is spread evenly.

Here are 6 simple steps to keep your washing machine balanced:

  1. Check if your machine is leveled with a bubble level.
  2. Adjust the feet or add shims if it’s unbalanced.
  3. Don’t overload the washer beyond its capacity.
  4. Before starting each Wash cycle, distribute the items in the drum evenly.
  5. Don’t place heavy items on one side or overload with light items on just one side.
  6. Position your washing machine on a flat surface.

Regularly clean out the debris below the washer. Also, keep it away from walls or furniture that could obstruct airflow.

Examine the hoses weekly or monthly (depending on frequency of use) to avoid any drainage issues. Make sure there are no kinks in hoses.

We must learn how to best care for new washing machines. Proper maintenance helps keep them running for years! Keep in mind, frequent upkeep is key to reducing laundry day frustrations. For Maytag washer drainage pains, don’t be stubborn, call in the experts.

Get professional help if the issue persists.

If your Maytag washer won’t drain, get help from an appliance repair service. They have the right know-how, tools, and skills to ensure your machine works properly.

First, investigate the root cause. Could the drain hose and pump filter be clogged? Verify that nothing is stuck inside or below the washer. If nothing helps, call a pro.

Also, do regular maintenance. Clean out the drain hose often. Check clothes pockets for objects before starting a cycle. This can reduce stress on the motor and make the machine last longer.

Frequently Asked Questions

Q: Why is my Maytag washer not draining?

A: There are several reasons why your Maytag washer might not be draining, including a clogged drain hose, a malfunctioning water pump, or a defective lid switch.

Q: How can I fix a clogged drain hose?

A: To fix a clogged drain hose, first, turn off the power to the washer and unplug it. Then, disconnect the drain hose from the back of the washer and check it for any clogs. Clear any obstructions and then reattach the hose.

Q: What do I do if the water pump is malfunctioning?

A: If the water pump is malfunctioning, it will need to be replaced. You can order a replacement part from your local appliance store or directly from the manufacturer.

Q: How can I tell if the lid switch is defective?

A: You can tell if the lid switch is defective by conducting a simple continuity test with a multimeter. If the switch does not have continuity, it needs to be replaced.

Q: Can I repair a malfunctioning water pump myself?

A: It is not recommended to try to repair a malfunctioning water pump yourself. It is best to contact a professional appliance repair technician to handle the repair work.

Q: How can I prevent my Maytag washer from not draining in the future?

A: The best way to prevent your Maytag washer from not draining in the future is to regularly clean and maintain it. This includes cleaning the drain hose, checking the water pump for any blockages, and making sure the lid switch is functioning properly.

SmartHomeBit Staff