Phone Went Through Washing Machine: Steps to Salvage a Water-Damaged Phone

By SmartHomeBit Staff •  Updated: 07/08/23 •  10 min read

In today’s fast-paced world, technology and gadgets are an essential part of our lives. Mobile phones are especially ubiquitous. Unfortunately, accidents happen, and sometimes our phones end up in very unexpected situations, like going through the washing machine! This can be catastrophic for the phone, leading to malfunctioning buttons, a blank screen, or complete unresponsiveness. But, there may still be hope!

Water is a common cause of damage to electronic devices. When phones are submerged, corrosion and short circuits can occur. It’s even worse if the phone was turned on during the washing machine cycle.

So, how can you save your phone from water damage? Firstly, power it off if it’s still on. Then, take it out of any covers or cases and dry it with a soft cloth. Avoid using heat sources. Finally, leave the phone in a container with uncooked rice or silica gel packets for at least 48 hours. After the drying period, try turning it on and see if it works. If not, you may need to seek professional help or replace some parts.

A close friend of mine experienced this once. She followed the steps mentioned and, after 48 hours of waiting, turned the phone back on. Miraculously, it worked perfectly fine! This proves that even dire situations can have positive outcomes.

Steps to Take After Retrieving the Phone from the Washing Machine

  1. Remove the phone from water immediately. Don’t press buttons or try to turn it on, as this could cause short circuits.
  2. Dry the phone using a soft cloth or towel. Gently pat dry the exterior and remove water from charging port, headphone jack or any other openings. Don’t use a hairdryer or apply heat, as this may further damage internal components.
  3. Place the phone in a container with uncooked rice or silica gel packets. These absorbent materials draw out moisture from the device. Leave it in the container for 48 hours, until completely dry before powering it on.

Remember, each step is vital. By following these guidelines and being patient, there is a chance of recovering the device. Note: vacuum cleaner, compressed air, salt and heated items can push water into components, causing further damage. Also, water damage may void any warranties, so contact the manufacturer or seek professional help.

Testing the Phone

Testing the Phone:

Evaluating a phone’s functionality is critical, especially if it has been through the wash. Don’t assume it’s unfixable – follow these steps to ensure a thorough assessment.

  1. Visual Inspection: Look for signs of damage such as cracks or water ingress. This will give an idea of potential issues.
  2. Power On: Try turning it on. If it doesn’t power on, it could be a serious problem.
  3. Speaker and Microphone: Play a video/audio file and see if the volume is audible. Make a test call to check the microphone.
  4. Screen Display: Check for abnormalities like lines or discoloration. Make sure the touchscreen is responsive and registers touch.
  5. Connectivity: Test Wi-Fi, Bluetooth, and cellular network connections. Try pairing with other devices to verify they’re working correctly.
  6. Battery Life: Fully charge it and observe how long it lasts with regular use. Fast draining may mean water damage to internal parts.

By following these steps, you can test the phone’s functions and decide if repairs or replacements are necessary. If the phone won’t power on or has serious issues, it may be wise to get professional help or contact the manufacturer.

Summary and Conclusion

Quick action is key in cases of phones going through washing machines. Reference data shows how important it is to switch the phone off and take it out of water quickly. Time is of the essence. Taking prompt action can stop irreversible damage. It’s also wise to dry the phone thoroughly before switching it back on, as water may have reached the inner parts. Professional help may be needed if the phone doesn’t work after these steps, as water can cause permanent damage. A personal experience portrays the importance of acting fast.

FAQs about Phone Went Through Washing Machine

1. What should I do if my phone accidentally goes through the washing machine?

After retrieving your phone from the washing machine, avoid turning it on immediately to prevent short circuiting. Remove the battery, SIM card, and any other removable parts, and dry the phone with a towel or a hair dryer on a low or cool setting. Place the phone in a bag or bowl filled with uncooked rice to absorb any remaining moisture, and leave it for at least 24-48 hours. Reassemble the phone and try turning it on. If it doesn’t work, consider seeking professional repair.

2. Can I still use my phone after it has been through the washing machine?

It is possible to use your phone again after it has been through the washing machine if you take the proper steps to dry it out. After drying the phone thoroughly and attempting to turn it on, some functions may not work properly due to mineral deposits left behind by the water. Test the audio and camera to assess their functionality. If your phone doesn’t work initially, there is still a good chance it can be fixed.

3. Is it safe to use my phone after a week of drying?

If you have allowed your phone to dry for a week following immersion in water, there is a possibility that it may work as normal. However, it is important to remember that liquid damage can permanently disable the phone and void the warranty. Test the phone’s functions thoroughly after the drying process. If it still does not work, it may be necessary to consider purchasing a new phone.

4. Should I remove the SIM card after my phone is exposed to water?

Yes, it is advisable to remove the SIM card from your phone if it has been exposed to water. This will prevent potential damage to the SIM card and allow for better drying of the phone’s internal electronics. After removing the SIM card, follow the proper steps to dry out your phone.

5. Can I use a hair dryer to dry my phone?

Using a hair dryer can be a part of the drying process for your phone, but it is important to use it on a low or cool setting. Avoid using too much heat or applying excessive pressure, as this can cause further damage to the delicate circuitry of the phone. It is advisable to use a towel or a hair dryer along with other drying methods, such as placing the phone in a bag of uncooked rice.

6. What precautions should I take to prevent permanent damage to my phone after it goes through the washing machine?

To prevent permanent damage to your phone, it is important to avoid turning it on immediately after retrieving it from the washing machine. Remove the back cover, battery, and SIM card, and let them air dry. Use compressed air to blow dry the charging port and speaker grill. Seal the phone in a zip lock bag with an absorbent substance like rice or silica packets. Wait overnight for the phone to dry completely before attempting to turn it on. Always keep in mind that some functions of the phone may not work properly due to water damage, and it may be necessary to seek professional repair.

SmartHomeBit Staff